Home > Company News > Installation and maintenance of Jaw crush
Company News
1. The bearing is subject to the full load of the machine, so good lubrication has a great relationship with the life of the bearing. It directly affects the transmission and operation rate of the machine. Therefore, the injected lubricant must be clean and the seal must be good.
The main oil injection point of this machine: (1) Rotating bearing (2) Roller bearing (3) All gears (4) Moving bearing, sliding plane.
2. Pay attention to whether the work of each part of the machine is normal.
3. Newly installed wheels are prone to looseness and must be checked frequently.
4. Pay attention to check the degree of wear of wearing parts, and pay attention to replace worn parts at any time.
5. The plane of the chassis where the mobile device is placed should be free of dust and other objects to prevent the movable bearing from moving on the chassis when the machine encounters materials that cannot be broken, resulting in a serious accident.
6. The temperature of the bearing oil rises, it should be stopped immediately to check the reason and eliminate it.
7. If there is impact sound when the rotating gear is running, it should be stopped and checked immediately and eliminated.
- Hand wheel operated PTFE Lined Diaphragm Valve
- BS Standard Manual PTFE Lined Diaphragm Valve
- Manual Fluorine Lined Diaphragm Valve
- Stainless Steel Type Pneumatic Ceramic Double Disc Gate Valve
- 5 Inch Class 150 Stainless Steel Pneumatic Ceramic Double Disc Gate Valve
- Anti Corrosive and Abrasive Type Pneumatic Ceramic Double Disc Gate Valve
- Anchor and Frame Type Impeller Blender
- Spiral Belt Blender Helical Ribbon and Screw Impeller
- Disc Turbine Impeller Arrow Blade Disc Turbine Impeller
- The Universal Round Plate Turbo-agitator Disc Turbine Impeller
- Six Flat Leaves Turbo-agitator Six Flat Blades Integral Open Turbine Impeller
- Six Sway Leaves Openning Turbine Blender Six Pitched Blades Integral Open Turbine Impeller
- Four Leaves Rotational Oar Blender Four Narrow Blades Detachable High Efficiency Impeller
- Four Sway Leaves Opening Turbine Blender Four Pitched Blades Integral Open Turbine Impeller
- The Four Flat Leaves Integral Openning Turbo-agitator Mixer Impeller
- Three Leaves Evolving Oar Blender High Efficiency Axial Flow Impeller
- Open Turbine Impeller Three Sway Leaves Turbo-agitator
- Double-paddle Agitator Integral Paddle Impeller with Subsidiary Blades
- Opposite Pitched Subsidiary Detachable Blade Impeller Agitator Folded
- Flat Blade Integral Paddle Impeller Even and Direct Agitator
- Bubble Removing Oar Blender Mixer Agitator Antifoaming Paddle
- Electric ventilation butterfly valve Stainless steel louver valve pneumatic louver valve
- Hyundai motor
- mud pump