Home > Company News > Maintenance of vibration motor
Company News
Maintenance of vibration motor2020-06-19 17:57:23
Vibration motor repair :
1. The outgoing cable of the vibration motor is subject to vibration, so the cable with greater elasticity should be used as the motor lead. Generally, the motor lead is easy to be broken or damaged at the root of the motor outlet. When such a failure occurs, the motor should be turned on from the inside of the motor Rewire.
2. The bearings of the vibration motor should be heavy-duty bearings, which can bear a certain axial load. The bearing life is not affected by the axial load regardless of the installation direction. When disassembling the bearing, record the position of the eccentric block and the percentage value of the exciting force. After replacing the bearing, check that the rotating shaft of the motor should have a certain axial series movement. First, do not install the eccentric block and test the motor. Record and reset the eccentric block.
3. The protective cover of the eccentric block should be well sealed to prevent dust from entering the inside and affecting the operation of the motor.
Reasonable use, diligent and conscientious inspection can better play the role of vibration motor and extend the service life of vibration motor.
New Products
- BS Standard Manual PTFE Lined Diaphragm Valve
- Manual Fluorine Lined Diaphragm Valve
- Stainless Steel Type Pneumatic Ceramic Double Disc Gate Valve
- 5 Inch Class 150 Stainless Steel Pneumatic Ceramic Double Disc Gate Valve
- Anti Corrosive and Abrasive Type Pneumatic Ceramic Double Disc Gate Valve
- Charging Dome Valve For Fly Ash Handing System
- Anchor and Frame Type Impeller Blender
- Disc Turbine Impeller Arrow Blade Disc Turbine Impeller
- The Universal Round Plate Turbo-agitator Disc Turbine Impeller
- Six Sway Leaves Openning Turbine Blender Six Pitched Blades Integral Open Turbine Impeller
- Four Leaves Rotational Oar Blender Four Narrow Blades Detachable High Efficiency Impeller
- The Four Flat Leaves Integral Openning Turbo-agitator Mixer Impeller
- Three Leaves Evolving Oar Blender High Efficiency Axial Flow Impeller
- Double-paddle Agitator Integral Paddle Impeller with Subsidiary Blades
- Opposite Pitched Subsidiary Detachable Blade Impeller Agitator Folded
- Bubble Removing Oar Blender Mixer Agitator Antifoaming Paddle
- Electric ventilation butterfly valve Stainless steel louver valve pneumatic louver valve
- Hyundai motor